
A body that pivots on rear hinges and is raised by a hydraulic ram to discharge its load by gravity. It is the standard way to move and unload loose bulk material.
A reinforced steel tipping body sits on a sub-frame with a hydraulic cylinder and power take-off pump, controlled from the cab. The tailgate swings on top hinges or is released to let the load run out.
Tipper bodies carry sand, aggregate, soil, demolition waste and agricultural bulk. Discharge takes seconds and needs no site handling equipment, which is why they dominate earthworks and construction haulage.
J.R. Machinery India fabricates tipper body bodies to order on the customer's chassis. Dimensions, fit-out and finish are set against your operating requirement, and the specification below is confirmed at the drawing stage before fabrication begins.
Build specification is agreed per order. Entries marked “to be confirmed” are fixed against the approved drawing and the chassis supplied.
| Body Type | Hydraulic tipper |
|---|---|
| Tipping | Rear tip, hydraulic cylinder |
| Power | Chassis PTO and pump |
| Floor Plate | Reinforced steel |
| Tailgate | Top-hinged, auto release |
| Tipping Angle | To be confirmed |
| Chassis | Customer-supplied LCV / MCV chassis |
| Sub-Frame | Fabricated steel |
| Fasteners | High-tensile bolted / welded |
| Finish | Primer + PU top coat |
| Load Rating | To chassis GVW |
| Lead Time | To be confirmed |
PTO-driven cylinder raises the body under cab control.
Heavier floor plate to take abrasive bulk loading.
Top-hinged tailgate releases as the body rises.
Fabricated sub-frame distributes load evenly across the chassis rails.
Sealed joints and gaskets keep the load bay dry in transit.
Surface treatment and paint system for long service in Indian conditions.