
A heavy-duty closed body built to container proportions, with a reinforced shell for high-cycle distribution work. It suits operators running fixed routes who need a body that stands up to daily dock handling.
The shell uses a heavier post and rail structure than a standard van body, skinned in pre-painted steel or aluminium and sealed throughout. Rear doors are fitted with cam-lock gear that takes repeated use.
Container bodies are used for line-haul and hub-to-hub distribution where the vehicle loads at a dock several times a day. The structure tolerates forklift entry and the wear that comes with it.
J.R. Machinery India fabricates container body bodies to order on the customer's chassis. Dimensions, fit-out and finish are set against your operating requirement, and the specification below is confirmed at the drawing stage before fabrication begins.
Build specification is agreed per order. Entries marked “to be confirmed” are fixed against the approved drawing and the chassis supplied.
| Body Type | Container style closed body |
|---|---|
| Panel | Pre-painted steel / aluminium |
| Rear Access | Double doors, cam-lock |
| Floor | Hardwood / steel, forklift rated |
| Sealing | Full perimeter gaskets |
| Chassis | Customer-supplied LCV / MCV chassis |
| Sub-Frame | Fabricated steel |
| Fasteners | High-tensile bolted / welded |
| Finish | Primer + PU top coat |
| Load Rating | To chassis GVW |
| Lead Time | To be confirmed |
Closer post spacing for stiffness under repeated loading.
Sealed double doors with lever locking gear.
Deck built to accept forklift wheel loads during loading.
Fabricated sub-frame distributes load evenly across the chassis rails.
Sealed joints and gaskets keep the load bay dry in transit.
Surface treatment and paint system for long service in Indian conditions.