
A flat deck with hinged side and rear panels that drop flat for loading from any direction. It is the most adaptable general-purpose body on a light commercial chassis.
Steel or aluminium dropsides are hinged along the deck edge and held by over-centre latches, dropping clear so a forklift or crane can reach the deck. The platform underneath is a plain load floor.
Dropside bodies carry building materials, drums, machinery and mixed site loads. Because all three sides open, awkward items can be loaded from whichever side the site allows.
J.R. Machinery India fabricates dropside body bodies to order on the customer's chassis. Dimensions, fit-out and finish are set against your operating requirement, and the specification below is confirmed at the drawing stage before fabrication begins.
Build specification is agreed per order. Entries marked “to be confirmed” are fixed against the approved drawing and the chassis supplied.
| Body Type | Dropside platform |
|---|---|
| Sides | Hinged steel / aluminium |
| Side Height | To customer requirement |
| Deck | Steel / hardwood platform |
| Latching | Over-centre |
| Chassis | Customer-supplied LCV / MCV chassis |
| Sub-Frame | Fabricated steel |
| Fasteners | High-tensile bolted / welded |
| Finish | Primer + PU top coat |
| Load Rating | To chassis GVW |
| Lead Time | To be confirmed |
Side and rear panels drop flat for unobstructed loading.
Positive latching that holds the sides closed in transit.
Plain platform that takes bulky and irregular loads.
Fabricated sub-frame distributes load evenly across the chassis rails.
Sealed joints and gaskets keep the load bay dry in transit.
Surface treatment and paint system for long service in Indian conditions.