
A plain flat platform with no sides, giving completely unobstructed access from every direction. It is the simplest body type and the one that handles the most awkward loads.
A steel deck frame is clad in chequered plate or hardwood and bolted to the chassis through a sub-frame, with headboard and lashing points as the only structure above deck level.
Open decks carry pipes, steel sections, machinery, pre-cast units and anything that overhangs or needs crane loading from above. Loads are secured with straps or chains to deck-edge rings.
J.R. Machinery India fabricates open deck body bodies to order on the customer's chassis. Dimensions, fit-out and finish are set against your operating requirement, and the specification below is confirmed at the drawing stage before fabrication begins.
Build specification is agreed per order. Entries marked “to be confirmed” are fixed against the approved drawing and the chassis supplied.
| Body Type | Flat platform |
|---|---|
| Deck | Chequered plate / hardwood |
| Headboard | Fabricated steel |
| Lashing | Deck-edge rings |
| Sides | None |
| Chassis | Customer-supplied LCV / MCV chassis |
| Sub-Frame | Fabricated steel |
| Fasteners | High-tensile bolted / welded |
| Finish | Primer + PU top coat |
| Load Rating | To chassis GVW |
| Lead Time | To be confirmed |
No sides or posts to obstruct loading from any angle.
Edge rings for strapping and chaining down the load.
Front board protects the cab from load shift under braking.
Fabricated sub-frame distributes load evenly across the chassis rails.
Sealed joints and gaskets keep the load bay dry in transit.
Surface treatment and paint system for long service in Indian conditions.